MATERIAL SAFETY DATA SHEET
1.Chemical Product and Company Identification
Product Name: Alkaline button cell
Manufacturer: GuanZhou TianQiu Enterprise Co., Ltd.系车特点
Address: 9/F, TianQiu Building No.16-30, He Yi Rd, San Yuan Li Ave, GuangZhou, China. Telephone: 8620-36322277
Effective Date: 2016/1/1
2.Composition/Information on Ingredients
Hazardous Components Approx wt% CAS # EC # Manganese Dioxide (MnO2) 30-34 1313-13-9 215-2
02-6 Zinc (Zn) 10-11 7440-66-6 231-175-3 Carbon (C)    4.8-5.0 7440-44-0 231-153-3 Potassium Hydroxide (KOH)    4.7-5.9 1310-58-3 215-181-3 Mercury (Hg) 0.35 7439-97-6 231-106-7 Cadmium (Cd) < 0.001 7440-43-9 231-152-8 Lead (Pb) 0.0075 7439-92-1 231-100-4 3.Hazards Identification
Routes of Entry: Not applicable under normal conditions
Health Hazards: In case of leakage, will be cause itchy and/or chemical burns when direct contact with electrolyte
Hazards to Environment: Not applicable
Fire and Explosion Hazards: Not applicable
张杰谢娜离婚证曝光
4.First-aid Measures
Skin Contact: If exposed to a leaking cell, remove contaminated clothing. Wash exposed areas with plenty of water and soap. If irritation occurs, consult a physician.
Eyes Contact: If a cell is leakage and materials contact eyes, flush immediately with running water for at least 15 minutes. Consult an ophthalmologist at once.
0573是哪里的区号
Inhalation: If vapor from vented or leaked cells are inhalation, move to fresh air and get medical attention.
Ingestion: Get immediately medical attention, do not induce vomiting or give a liquid to unconscious person.
5.Fire Fighting Measures新宾
Hazard Characteristic: Not available
Hazards Expose to Combustion Products: In case of fire, carbon dioxide, carbon monoxide and other toxic organic substances will be generated. Do not inhale fumes and smoke.
Extinguishing Media: In case of fire, you can use any class of fire extinguisher.
Special Fire Fighting Procedures: Fire fighters should wear self-contained breathing apparatus.
6.Accidental Release Measures
Precautions: Avoid direct contact with the leaking or ruptured cells. Avoid short circuit. Methods for Clean Up: Care for well-ventilated conditions. Recycle or dispose of the materials in an appropriate way.
7.Handling and Storage
高层建筑规范
Precaution: Handing and transfer the products carefully, make sure the packing always in good condition. Damaged packing may cause cells contact together, in this case cells may short circuit or improperly connected, it cause cells venting, leaking or exploding. Storage: Store in a dry, cool and well-ventilated area.
8.Exposure Control/Personal Protection
Exposition/Technical Measures: Atmospheric vapor concentrations must be minimized by adequate ventilation.
Protection of Hands, Eyes, and Skin: No required under normal use conditions. When handling leaking cells, use gloves and wear safety glasses to protect hands, eyes and skin.
General Safety and Hygiene Measures: Use only as directed.
9.Physical and Chemical Properties
Physical State and Appearance:Cylindrical
Odor: Odorless pH: N/A
Melting Point (℃): N/A Specific Gravity (H2O=1): N/A
Boiling Point (℃): N/A  Vapor Density (Air=1): N/A
Vapor Pressure (kPa): N/A  Heat of Combustion (kJ/mol): N/A
Critical Temperature (℃): N/A Critical Pressure (MPa): N/A
Partition Coefficient: N/A Flash Point (℃): N/A
Ignition Temperature (℃): N/A Explosion Limit % (V/V): N/A
Solubility in Water: N/A Solubility in Other Solvents: N/A
10. Stability and Reactivity
Stability: Stable
Incompatibility: None
Condition to Avoid: Avoid shorting, mechanical & thermal abuse
Hazardous Polymerization: Will not occur
Hazardous Decomposition: None
11.Toxicological Information
Note: Since the materials in this cell are sealed in the can, the potential for exposure to the components of the cell is negligible, when the cell is used as directed. However technical or electrica
l abuse of the cell may result in the release of cell contents.
Toxicity to Animals: Not applicable
Chronic Effects on Human: Not applicable
12.Ecological Information
This product has not been tested for environmental effects.
13.Disposal Consideration
Dispose in accordance with Federal, States and local regulations
14.Transport Information
TianQiu Alkaline button cells are considered to be “dry cell” batteries and are unregulated for purposes of transportation by the U.S. Department of Transportation (DOT), International Civil Aviation Administration (ICAO), International Air Transport Association (IATA) and the International Maritime Organization (IMO).
The only requirements for shipping these cells by DOT is Special Provision 130 which states: "Batteries, dry are not subject to the requirements of this subchapter only when they are offered for transportation in a manner that prevents the dangerous evolution of heat (for example, by the effective insulation of exposed terminals). "
The only requirements for shipping these cells by ICAO and IATA is Special Provision
A123 which states: “An electrical battery or battery powered device having the potential of dangerous evolutions of heat that is not prepared so as to prevent a short-circuit (e.g. in the case of batteries, by the effective insulation of exposed terminals; or in the case of equipment, by disconnection of the battery and protection of exposed terminals) is forbidden from transportation.” The International Maritime Dangerous Goods Code (IMDG) regulate them for ocean transportation under Special Provision 304 which says: “Batteries, dry, containing corrosive electrolyte which will not flow out of the battery if the bateery case is cracked are not subject to the provisions of this Code provided the batteries are securely packed and protected against
short-circuits. Examples of such batteries are: alkali-manganese, zinc-carbon, nickel metal hydride
and nickel-cadmium batteries.”
15. Regulatory Information
Special requirement be according to the local regulatories.
16. Other information周杰伦和江语晨
Do not heat or dispose of in fire. Do not recharge or disassemble the cell.
Notice to reader:
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the contr
ol of TianQiu, TianQiu will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product, which may not be covered by this MSDS. The user is responsible for full compliance.