解决方法：该问题已在R11的补丁R11B02D082SP13、R11B02D095SP15中解决（R11B02D082、R11B02D095为主机版本）
问题设备：广州UA5000IPMB 172.18.130.2 UA5000IPMBV100R011B02D082－请
打上R11B02D082SP13补丁
广州 UA5000IPMB 172.16.130.2 UA5000IPMBV100R011B02D082SP02－请打上
R11B02D082SP13补丁
广州 UA5000IPMB 172.16.194.11 UA5000IPMBV100R011B02D095SP01- 请打上
R11B02D095SP15补丁
UA5000补丁操作指导：（以R11B02D095SP15为例，R11B02D082SP13的操作方法完全相同）1、安装前准备
请按照下面的步骤完成安装前的必要准备。
步骤 1 检查设备是否支持补丁：
所属的硬件、单板名称是否为：H602IPMB、H612IPMB
步骤 2 版本确认，按下述步骤进行：如何激发学生的学习兴趣
UA5000(config)#display language Local: Description: CHINESE SIMPLIFIED (DEFAULT LANGUAGE) Version: UA5000IPMBV100R011B02D095 General:
Description: ENGLISH (DEFAULT LANGUAGE) Version: UA5000IPMBV100R011B02D095
步骤 3 确认系统没有正在加载别的文件，按下述步骤进行：
UA5000(config)#display progress load ======No such kind of operation is running====== 步骤 4 备份设备配置文件、提取设备信息，以便补丁出现问题时恢复设备和分析问题：备份数据库：
UA5000(config)#save
UA5000(config)#backup data tftp <serveripaddress> db_ipmb.dat
2、 安装步骤
请按照下面的步骤完成补丁的安装。
步骤 1 查看补丁15是否存在，及补丁状态：
UA5000(config)#display patch 15 active / standby
同时可以查看其它补丁是否正常：
UA5000(config)#display patch all active / standby
步骤 2 如果补丁15存在，则删除补丁15：（注：如果在步骤1中发现补丁15不存在，则直接进行步骤3）
UA5000(config)#patch delete 15 active / standby
步骤 3 加载补丁15：
UA5000(config)#load patch tftp 文件存放地址 文件名 active / standby
步骤 4 查看补丁15是否加上：
UA5000(config)#display patch 15 active / standby
步骤 5 加载成功后激活补丁15：
UA5000(config)#patch activate 15 active / standby
Patch operation executed successfully
步骤 6 激活成功后运行补丁15：
UA5000(config)#patch run 15 active / standby
步骤 7 执行save操作，保存数据：
UA5000(config)#save
步骤 8 如果使用了从框，加载补丁包中的APSB单板软件：
UA5000(config)#load program tftp文件存放地址 1/2
Whether to load other boards of same type ? (y/n)[n]:y
FrameID and SlotID of the board to be loaded. [F/S]: 1/3
Whether to load other boards of same type ? (y/n)[n]:n
Board name[H601APSB]:
File name [H601APSB.arj]:
Service board will automatically restart after successful loading
And the corresponding service will be terminated for a short while
Whether to start loading? (y/n)[n]:y
3、安装正确性检查
步骤 1 请按照下面的步骤检查补丁是否安装成功。熟悉键盘
UA5000(config)#display patch all active / standby
Host version: UA5000IPMBV100R011
Patch version: UA5000IPMBV100R011B02D095SP15
Patch number: 15
Number of formal patch: 15
Number of temporary patch: 0
Number of running patch: 15
Number of actived patch: 0
Number of deactived patch: 0
4、 如何恢复到补丁安装前的状态
如果需要，可以按照下列步骤恢复到补丁版本安装前的状态。
步骤 1 删除主用主控板补丁：
UA5000(config)#patch delete 15
active
Are you sure to delete the patch? (y/n)[n]:y Patch operation executed successfully 步骤 2 删除备用主控板补丁：
UA5000(config)#patch delete 15 standby Are you sure to delete the patch? (y/n)[n]:y Patch operation executed successfully
步骤 3 如果使用了从框，加载原版本的APSB单板软件：
UA5000(config)#load program tftp文件存放地址 1/2
Whether to load other boards of same type ? (y/n)[n]:y
FrameID and SlotID of the board to be loaded. [F/S]: 1/3
Whether to load other boards of same type ? (y/n)[n]:n
Board name[H601APSB]:
File name [H601APSB.arj]:
Service board will automatically restart after successful loading
And the corresponding service will be terminated for a short while
Whether to start loading? (y/n)[n]:y
问题二描述：设备的MIB库没有释放给snmpServer
解决方法：建议对以下有问题的四台MINI DSLAM设备加载补丁，或者统一升级到MA5600
V100R011B08D038SP03（升级方法请参考附件< V100R011B08D038升级指导书>）
肇庆 MA5105 172.24.134.41 MA5100 V100R010(MA5105)B02D116(2007-4-20) Version－请打上B02D116SP08补丁
江门 MA5605 172.24.116.48 MA5600 V100R011(MA5605)B03D065(2007-4-22) Version－请打上B03D065SP03补丁
江门 MA5605 172.24.116.98 MA5600 V100R011(MA5605)B03D095 －请升级版本V100
R011B08D038再加载SP03补丁
江门 MA5605 172.24.117.15 MA5600 V100R011(MA5605)B05D015(2006-11-2) Version－请打上SP02补丁
MA5105补丁操作指导：
1、安装前准备
请按照下面的步骤完成安装前的必要准备。
步骤 1 检查设备是否支持补丁：
设备使用的主控板名称是否为：H521MIEA、H521 MIMA、H521MIFE、H521MIFS、H521MIFM、H521MFCE、H521 MFCS、H521 MFCM、H 522MFCE、H522 MFCS、H522 MFCM主控板之一。请参考《MA5100 V100R010B02D116版本配套说明书.doc》。
步骤 2 版本确认，按下述步骤进行：
MA5105(diag)%%show vrbd
V100R010 B02D116 Apr 20 2007, 16:29:14
步骤 3 备份设备数据、提取设备信息，以便补丁出现问题时恢复设备和分析问题：
MA5105(config)#save
System data have not been changed.
Do you want to save data to FLASH?(y/n) [n]:y
This operation will take several minutes,
Saving data in progress 100%.
Save data to FLASH successfully.
2009/11/10 14:44:08 major SYS: Save success(SERIAL save)
MA5105(config)#backup data efs tftp 192.168.1.9
<filename>[MTU_DATA.EFS]:MTU_DATA.EFS
Are you sure to continue?(y/n) [y]:
清晰的反义词This operation will take several minutes,
Backing up data in progress 100%.
Backup successfully.
2009/11/10 15:01:35 major SYS: Backup success(SERIAL use TFTP backup data)
192.168.1.9为目标主机IP地址，根据实际而定
2、安装注意事项
1、 由于现网已运行的MA5105存在读写FLASH没有互斥的问题，会导致SP08的加载随机出现失败。加载失败时会提示以下信息和告警：
“FLASH operation failed.”
“Load operation failed.”
“major SYS: Load fail”
所以在加载SP08补丁时需要确认补丁是否加载成功，若补丁加载失败，请先执行“patch delete 8”命令将内存中的SP08补丁删除，然后再重新加载SP08补丁。
2、 在加载SP08补丁之前，若系统已出现数据保存失败，需要在运行SP08补丁后，重新保存系统数据。
3、 安装步骤
请按照下面的步骤完成补丁的安装。
步骤 1 查看补丁8是否存在，及补丁状态：
MA5105(config)#show patch 8
步骤 2 如果补丁8存在，则删除补丁8：（注：如果在步骤1中发现补丁8不存在，则直接进行步骤3）
MA5105(config)#patch delete 8
Are you sure to continue?(y/n) [y]:y
Removing success!
步骤 3 加载补丁MA5100 V100R010B02D116SP08：
MA5105(config)#patch load tftp 192.168.1.9 MA5100V100R010B02D116SP08.pat
Are you sure to load?(y/n) [y]:y
Loading please wait
Begin
Loading patch in progress 100%.
2009/11/10 15:19:51 major SYS: Load success(SERIAL use TFTP load patch)
步骤 4 查看补丁8是否成功加载：
MA5105(config)#show patch 8
Patch CRC: 12194
Patch type: C - Common patch
Patch state: running
Patch code address: 0x199b728
Patch code length: 0x154
Patch data address: 0x19a8004
Patch data length: 0x0
Function number: 2
******************* Function 1 information *******************
Function old address: 0x2a25b0
Function current address: 0x199b728
******************* Function 2 information ******************* Function old address: 0x2a2504
Function current address: 0x199b7e8
步骤 5 加载成功后激活补丁8：
MA5105(config)#patch activate 8
Are you sure to continue?(y/n) [y]:y
Activating success!
步骤 6 激活成功后运行补丁8：
MA5105(config)#patch run 8
Are you sure to continue?(y/n) [y]:y
Running success!
步骤 7 保存数据库：.
MA5105(config)#save
System data have not been changed.
Do you want to save data to FLASH?(y/n) [n]:y
This operation will take several minutes,
Saving data in progress 100%.
Save data to FLASH successfully.
武汉美食推荐2009/11/10 19:22:36 major SYS: Save success(SERIAL save)
4、安装正确性检查
步骤 1 请按照下面的步骤检查补丁是否安装成功。
MA5105(config)#show patch all
Patch version: V100R010CHSB02D116SP08
Patch file start address: 0x1990000
Patch area start address: 0x1990044
Patch area length: 0x1ffbc
Current patch number: 8
Common patch number: 8
Temporary patch number: 0
Deactive patch number: 0
Active patch number: 0
Running patch number: 8
5、如何恢复到补丁安装前的状态
如果需要，可以按照下列步骤恢复到补丁版本安装前的状态。
步骤 1 删除补丁：
MA5105(config)#patch delete 8
复仇者联盟4彩蛋
Are you sure to continue?(y/n) [y]:y
Removing success!
MA5605补丁操作指导：（以V100R011B03D065SP03为例）
1、 安装前准备
请按照下面的步骤完成安装前的必要准备。
步骤 1 版本确认
MA5605(config)#show version
[<frameId/slotId>]{(0)[/(0-4)]}:
MA5600 V100R011(MA5605) Version B03D065, RELEASE SOFTWARE
Copyright(C) 1998-2007 by Huawei Technologies Co., Ltd.
Compiled Apr 22 2007, 18:18:22
Program-base: 0x4100000(A), the length of the program is 4987432
No new program in flash, system will boot from A
BIOS Version is 107
MA5605 with 1 MPC850 (Rev 33.01) CPU running at 40Mhz
64 M bytes SDRAM, 19793760 bytes (19329K bytes) free
32 M bytes Flash Memory
512K bytes SRAM
MA5605 uptime is 0 day, 0 hour, 4 minutes, 53 seconds
步骤 2 备份设备配置文件、提取设备信息，以便补丁出现问题时恢复设备和分析问题 MA5605(config)#save
System data have not been changed.
Do you want to save data to FLASH?(y/n) [n]:y
任家萱烧伤图片
This operation will take several minutes,
Saving data in progress 100%.
Save data to FLASH successfully.
2008/09/06 18:01:00 major SYS: Save success(SERIAL save)
MA5605(config)#backup data efs tftp 10.144.82.61 MA5605_DATA.EFS
Are you sure to continue?(y/n) [y]:
This operation will take several minutes,
Backing up data in progress 100%.
Backup successfully.
2008/09/06 18:06:18 major SYS: Backup success(SERIAL use TFTP backup data) 说明：10.144.82.61为目标主机IP地址，根据实际而定
----结束
2、 安装注意事项
1） 该补丁要求被加载MA5605设备所使用软件版本为MA5600 V100R011B03D065。
3、安装步骤
请按照下面的步骤完成补丁的安装。
步骤 1 加载补丁文件
MA5605(config)#patch load
{tftp,xmodem}:tftp
{<server-ip>}:10.144.82.61
<filename>:sp03.pat
发布评论