Cisco 4500/4000系列交换机引擎密码恢复
步骤：
!−−− Here, you power cycle the switch.
**********************************************************
* Welcome to ROM Monitor for WS−X4014 System. *
长城的故事和传说* Copyright (c) 1999−2000, 2001 by Cisco Systems, Inc. *余霜和管泽元分手
* All rights reserved. *
**********************************************************
轮滑技巧
ROM Monitor Program Version 12.1(10r)EY(1.21)
Board type 1, Board revision 7
Swamp FPGA revision 16, Dagobah FPGA revision 43
Timer interrupt test passed.
MAC Address : 00−02−b9−83−af−fe
IP Address : 172.16.84.122
Netmask : 255.255.255.0
Gateway : 172.16.84.1
TftpServer : Not set.
如何给手机相册加密Main Memory : 256 MBytes
***** The system will autoboot in 5 seconds *****
Type control−白荟C to prevent autobooting.
!−−− At this point, press Ctrl+C.
. please wait
. please wait
rommon 1 > [interrupt]
!−−− The module ended in the ROMmon.
rommon 1 > [interrupt]
2、 进入了ROMmon模式后使用命令“confreg”进入系统恢复阶段。
rommon 1 > confreg
Configuration Summary :
=> load ROM after netboot fails
=> console baud: 9600
=> autoboot from: commands specified in 'BOOT' environment variable
do you wish to change the configuration? y/n [n]: y
enable "diagnostic mode"? y/n [n]: n
enable "use net in IP bcast address"? y/n [n]: n
disable "load ROM after netboot fails"? y/n [n]: n
enable "use all zero broadcast"? y/n [n]: n
enable "break/abort has effect"? y/n [n]: n
enable "ignore system config info"? y/n [n]: y你的名字中国上映
change console baud rate? y/n [n]: n
change the boot characteristics? y/n [n]: n
Configuration Summary :
发布评论