ASTM标准中英对照 |
标准号 | 英文名称 | 中文名称 |
A1-00(2005) | Standard Specification for Carbon Steel Tee Rails | |
A2-02 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types | 普通型,带槽和防护型碳素工字钢轨 |
A3-01(2006) | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) | 低、中、高碳素钢鱼尾(连接)板 |
A6/A6M-05a | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling | 轧制结构钢板材、型材和薄板桩通用技术要求 |
A20/A20M-05 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | 压力容器用钢板材通用要求 |
A27/A27M-05 | Standard Specification for Steel Castings, Carbon, for General Application | 通用碳素钢铸件 |
A29/A29M-05 | Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for | |
A31-04 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels | 钢铆钉及铆钉和压力容器用棒材 |
A34/A34M-01 | Standard Practice for Sampling and Procurement Testing of Magnetic Materials | |
A36/A36M-05 | Standard Specification for Carbon Structural Steel | 碳素结构钢技术规范 |
A47/A47M-99(2004) | Standard Specification for Ferritic Malleable Iron Castings | 铁素体可锻铁铸件 |
A48/A48M-03 | Standard Specification for Gray Iron Castings | 灰铁铸件 |
A49-01(2006) | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars | 热处理碳素钢连接棒材,微合金连接棒材和法兰连接棒材的标准规范 |
A53/A53M-06 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | 无镀层热浸的、镀锌的、焊接的及无缝钢管的技术规范 |
A65-01 | Standard Specification for Steel Track Spikes | 钢轨道钉 |
A66-01 | Standard Specification for Steel Screw Spikes | 钢质螺旋道钉 |
A67-00(2005) | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked | 热加工低碳钢和高碳钢垫板技术规范 |
A74-06 | Standard Specification for Cast Iron Soil Pipe and Fittings | 铸铁污水管及配件的技术规范 |
A82/A82M-05a | Standard Specification for Steel Wire, Plain, for Concrete Reinforcement | 钢筋混凝土用无节钢丝 |
A90/A90M-01 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | 镀锌和镀锌合金钢铁制品镀层重量的试验方法 |
A99-03 | Standard Specification for Ferromanganese | 锰铁合金 |
A100-04 | Standard Specification for Ferrosilicon | 硅铁 |
A101-04 | Standard Specification for Ferrochromium | 铬铁 |
A102-04 | Standard Specification for Ferrovanadium | 钒铁合金 |
A105/A105M-05 | Standard Specification for Carbon Steel Forgings for Piping Applications | 管系部件用碳素钢锻件 |
A106/A106M-06 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | 高温用无缝碳素钢管 |
A108-03e1 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished | 优质冷加工碳素钢棒材技术规范 |
A109/A109M-03 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled | 冷轧碳素钢带技术规范 |
A111-99a(2004)e1 | Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire | 电话和电报线路用镀锌"铁"丝规格 |
A116-05 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric | 镀锌钢丝编织栏栅网 |
A121-99(2004) | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire | 镀锌刺钢丝 |
A123/A123M-02 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | 钢铁产品的锌镀层(热浸镀锌)技术规范 |
A125-96(2001) | Standard Specification for Steel Springs, Helical, Heat-Treated | 热处理螺旋形钢弹簧 |
A126-04 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | 阀门、法兰和管配件用灰铁铸件 |
A128/A128M-93(2003) | Standard Specification for Steel Castings, Austenitic Manganese | 钢铸件,奥氏体锰 |
A131/A131M-04ae1 | Standard Specification for Structural Steel for Ships | 海船用结构钢 |
A132-04 | Standard Specification for Ferromolybdenum | 钼铁合金 |
A134-96(2005) | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) | 电熔(电弧)焊钢管(NPS为16英寸和16英寸以上) |
A135/A135M-06 | Standard Specification for Electric-Resistance-Welded Steel Pipe | 电阻焊钢管 |
A139/A139M-04 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | 电熔(电弧)焊钢管(4英寸以上的) |
A143/A143M-03 | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement | 热浸镀锌结构钢制品防脆裂措施和探测脆裂的程序 |
A144-04 | Specification for Ferrotungsten | 铁钨合金规范 |
A146-04 | Standard Specification for Molybdenum Oxide Products | 氧化钼制品 |
A148/A148M-05 | Standard Specification for Steel Castings, High Strength, for Structural Purposes | 结构用高强度钢铸件 |
A153/A153M-05 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | 钢铁制金属构件上镀锌层(热浸) |
A159-83(2001) | Standard Specification for Automotive Gray Iron Castings | 汽车用灰铁铸件 |
A167-99(2004) | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip | 不锈钢和耐热铬镍钢板、薄板及带材 |
A176-99(2004) | Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip | 不锈钢和耐热铬钢板、薄板及带材 |
A178/A178M-02 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | 电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范 |
A179/A179M-90a(2005) | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | 热交换器和冷凝器用无缝冷拉低碳钢管 |
A181/A181M-01 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping | 普通锻制碳素钢管的规格 |
A182/A182M-05a | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | 高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件 |
A183-03 | Standard Specification for Carbon Steel Track Bolts and Nuts | 钢轨用碳素钢螺栓和螺母 |
A184/A184M-06 | Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement | 混凝土加筋用变形钢筋编织网 |
A185/A185M-06e1 | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete | 钢筋混凝土用焊接钢丝结构 |
A192/A192M-02 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | 高压用无缝碳素钢锅炉管 |
A193/A193M-06a | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications | 高温或高压设备和其他特殊用途用合金钢和不锈钢螺栓材料 |
A194/A194M-06a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 高温和高压设备用碳素钢与合金钢螺栓和螺母的规格 |
A197/A197M-00(2006) | Standard Specification for Cupola Malleable Iron | 化铁炉用可锻铸铁 |
A203/A203M-97(2003) | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | 压力容器用镍合金钢板 |
A204/A204M-03 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum | 压力容器用钼合金钢板 |
A209/A209M-03 | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | 锅炉和过热器用无缝碳钼合金钢管 |
A210/A210M-02 | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | 锅炉和过热器用无缝碳钼合金钢管 |
A213/A213M-06ae1 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管 |
A214/A214M-96(2005) | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | 热交换器与冷凝器用电阻焊接碳素钢管 |
A216/A216M-04 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 高温下使用的适合于熔焊的碳素钢铸件规格 |
A217/A217M-04 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service | 适合高温受压零件用合金钢和马氏体不锈钢铸件 |
A220/A220M-99(2004) | Standard Specification for Pearlitic Malleable Iron | 珠光体可锻铁 |
A225/A225M-03 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel | 压力容器用锰矾镍合金钢板 |
A227/A227M-06 | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs | 机械弹簧用冷拉钢丝 |
A228/A228M-02 | Standard Specification for Steel Wire, Music Spring Quality | 乐器用优质弹簧钢丝 |
A229/A229M-99(2005) | Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs | 机械弹簧用油回火的钢丝 |
A230/A230M-05 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality | 阀门用油回火优质碳素钢弹簧丝 |
A231/A231M-04 | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire | 铬钒合金钢弹簧丝 |
A232/A232M-05 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | 阀门用优质铬钒合金钢弹簧丝 |
A234/A234M-06 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | 中温与高温下使用的锻制碳素钢及合金钢管配件 |
A239-95(2004) | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles | 用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法 |
A240/A240M-06b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 压力容器用耐热铬及铬镍不锈钢板、薄板及带材 |
A242/A242M-04e1 | Standard Specification for High-Strength Low-Alloy Structural Steel | 高强度低合金结构钢 |
A247-67(1998)e1 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings | 铁铸件中石墨显微结构评定试验方法 |
A249/A249M-04a | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | 锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管 |
A250/A250M-05 | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | 锅炉和过热器用电阻焊铁素体合金钢管 |
A252-98(2002) | Standard Specification for Welded and Seamless Steel Pipe Piles | 焊接钢和无缝钢管桩 |
A254-97(2002) | Standard Specification for Copper-Brazed Steel Tubing | 铜焊钢管规格 |
A255-02e1 | Standard Test Methods for Determining Hardenability of Steel | 测定钢淬透性用末端淬火试验的标准试验方法 |
A262-02ae3 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 奥氏体不锈钢晶间浸蚀敏感性的检测 |
A263-03 | Standard Specification for Stainless Chromium Steel-Clad Plate | 耐腐蚀铬钢包覆板材,薄板材及带材技术规范 |
A264-03 | Specification for Stainless Chromium-Nickel Steel-Clad Plate | 包覆的不锈铬镍钢板,薄板及带材规格 |
A265-03 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate | 镍和镍基合金包覆钢板规格 |
A266/A266M-03a | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 压力容器部件用碳素钢锻件规格 |
A268/A268M-05a | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | 一般设备用无缝和焊接铁素体与马氏体不锈钢管 |
A269-04 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | 一般设备用无缝和焊接奥氏体不锈钢管 |
A270-03a | Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing | 卫生设施用无缝钢和焊接奥氏体不锈钢管 |
A275/A275M-06 | Standard Test Method for Magnetic Particle Examination of Steel Forgings | 钢锻件的磁粉检查试验方法 |
A276-06 | Standard Specification for Stainless Steel Bars and Shapes | 不锈钢棒材和型材 |
A278/A278M-01 | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) | 适用于650F容压部件用灰铸铁件的技术规范 |
A283/A283M-03 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates | 低和中等抗拉强度碳素钢板 |
A285/A285M-03 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | 压力容器用低和中等抗拉强度的碳素钢板 |
A288-91(2003) | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators | 涡轮发电机磁性定位环用碳素钢和合金钢锻件 | 教师节礼物制作
A289/A289M-97(2003) | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators | 发电机非磁性定位环用合金钢锻件的技术规范 |
A290/A290M-05 | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears | 减速器环用碳素钢和合金钢锻件 |
A291/A291M-05 | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears | 减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件 |
A295/A295M-05 | Standard Specification for High-Carbon Anti-Friction Bearing Steel | 高碳耐磨轴承钢技术规范 |
A297/A297M-97(2003) | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application | 一般用耐热铬铁与镍铬铁合金钢铸件规格 |
A299/A299M-04 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon | 压力容器用锰硅碳钢板 |
A302/A302M-03 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | 压力容器用锰钼和锰钼镍合金钢板 |
A304-05e2 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | 有末端淬火淬透性要求的合金钢棒材的技术规范 |
A307-04 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范 |
A308/A308M-03 | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process | 经热浸处理镀有铅锡合金的薄板材的技术规范 |
A309-01 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test | 用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法 |
A311/A311M-04 | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | 有机械性能要求的消除应力的冷拉碳素钢棒 |
A312/A312M-06 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 无缝和焊接奥氏体不锈钢管 |
A313/A313M-03 | Standard Specification for Stainless Steel Spring Wire | 不锈钢弹簧丝技术规范 |
A314-97(2002) | Standard Specification for Stainless Steel Billets and Bars for Forging | 锻造用不锈及耐热钢坯及钢棒规格 |
A319-71(2001) | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts | 高温无压部件用灰铁铸件 |
A320/A320M-05a | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service | 低温用合金钢螺栓材料规格 |
A321-90(2001) | Standard Specification for Steel Bars, Carbon, Quenched and Tempered | 经淬火和回火的碳素钢棒 |
A322-06 | Standard Specification for Steel Bars, Alloy, Standard Grades | 合金钢棒材.级别 |
A323-05 | Standard Specification for Ferroboron | 硼铁规格 |
A324-73(2004) | Standard Specification for Ferrotitanium | 钛铁合金 |
A325M-05 | Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] | 经热处理最小抗拉强度为830Mpa的热处理钢结构螺栓 |
A325-06 | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength | 经热处理最小抗拉强度为120/106ksi的热处理钢结构螺栓 |
A327-91(2006) | Standard Test Methods for Impact Testing of Cast Irons | 铸铁冲击试验方法 |
A327M-91(2006) | Standard Test Methods for Impact Testing of Cast Irons (Metric) | 铸铁冲击试验方法(米制) | 工资条
A328/A328M-05 | Standard Specification for Steel Sheet Piling | 薄钢板桩 |
A333/A333M-05 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | 低温用无缝与焊接钢管规格 |
A334/A334M-04a | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | 低温设备用无缝与焊接碳素和合金钢管 |
A335/A335M-06 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | 高温用无缝铁素体合金钢管 |
A336/A336M-06 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts | 压力与高温部件用合金钢锻件规格 |
A338-84(2004) | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) | 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件 |
A340-03a | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing | 有关磁性试验用符号和定义的术语 |
A341/A341M-00(2005) | Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods | 用直流磁导计和冲击试验法测定材料的直流磁性能的试验方法 |
A342/A342M-04 | Standard Test Methods for Permeability of Feebly Magnetic Materials | 磁铁材料导磁率的试验方法 |
A343/A343M-03 | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame | 在电力频率下用瓦特计-安培计-伏特计法(100-1000赫兹)和25 厘米艾普斯亭(EPSTEIN) 机架测定材料的交流电磁性能的试验方法 |
A345-04 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications | 磁设备用平轧电炉钢 |
A348/A348M-05 | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame | 用瓦特计--安培计--伏特计法(100-10000赫兹)和25厘米艾普斯亭框测定材料的交流磁性能的试验方法 |
A350/A350M-04a | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 要求进行缺口韧性试验的管道部件用碳素钢与低合金钢锻件技术规范 |
A351/A351M-06 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts | 容压零件用奥氏体及奥氏体铁素体铸铁的技术规范 |
A352/A352M-06 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service | 低温受压零件用铁素体和马氏体钢铸件规格 |
A353/A353M-04 | Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered | 压力容器用经二次正火及回火处理的含9%镍的合金钢板 |
A354-04 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | 淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格 |
A355-89(2006) | Standard Specification for Steel Bars, Alloys, for Nitriding | 渗氮用合金钢棒 |
A356/A356M-05 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines | 蒸汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件 |
A358/A358M-05 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | 高温用电熔焊奥氏体铬镍合金钢管 |
A363-03 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand | 地面架空线用镀锌钢丝绳 |
A367-60(2005) | Standard Test Methods of Chill Testing of Cast Iron | 铸铁的激冷试验方法 |
A368-95a(2004) | Standard Specification for Stainless Steel Wire Strand | 不锈钢和耐热钢丝绳的标准 |
A369/A369M-02 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | 高温用锻制和镗孔碳素钢管和铁素体合金钢管 |
A370-05 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | 钢制品机械测试的标准试验方法和定义 |
A372/A372M-03 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | 薄壁压力容器用碳素钢及合金钢锻件 |
A376/A376M-06 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service | 高温中心站用无缝奥氏钢管 |
A377-03 | Standard Index of Specifications for Ductile-Iron Pressure Pipe | 球墨铸铁压力管规范索引 |
A380-06 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems | 不锈钢零件、设备和系统的清洗和除垢 |
A381-96(2005) | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | 高压输送用金属弧焊钢管 |
A384/A384M-02 | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies | 防止钢组件热浸镀锌时翘曲和扭曲用安全保护 |
A385-05 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) | 提供高质量镀锌覆层(热浸) |
A387/A387M-06 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum | 压力容器用铬钼合金钢板 |
A388/A388M-05 | Standard Practice for Ultrasonic Examination of Heavy Steel Forgings | 重型钢锻件超声波检测 |
A389/A389M-03 | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service | 适合高温受压部件用经特殊热处理的合金钢铸件规格 |
A390-06 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | 饲养家禽用镀锌钢丝栏栅网(六角形和直线形) |
A391/A391M-01 | Standard Specification for Grade 80 Alloy Steel Chain | 80号合金钢链条 |
A392-03 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric | 镀锌钢丝链环栏栅网 |
A394-05 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare | 传动塔架用镀锌和裸露钢螺栓 |
A395/A395M-99(2004) | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | 高温用铁素体球墨铸铁受压铸件 |
A400-69(2006) | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | 钢棒的成分及机械性能选择指南 |
A401/A401M-03 | Standard Specification for Steel Wire, Chromium-Silicon Alloy | 铬硅合金钢丝 |
A403/A403M-06 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 锻制奥氏体不锈钢管配件 |
A407-93(2004) | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs | 盘簧用冷拉钢丝 |
A409/A409M-01(2005) | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service | 腐蚀场所或高温下使用的焊接大口径奥氏体钢管 |
A411-03 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire | 镀锌低碳钢铠装线 |
A413/A413M-01 | Standard Specification for Carbon Steel Chain | 碳素钢链 |
A414/A414M-06 | Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels | 压力容器用碳素薄钢板 |
A416/A416M-06 | Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete | 预应力混凝土用无涂层七股钢铰线 |
A417-93(2004) | Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units | 之字形、方形、正弦形家具用弹簧元件用冷拔钢丝 |
A418/A418M-05 | Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | 涡轮机及发电机钢转子锻件的超声波检查方法 |
A420/A420M-06 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | 低温下用锻制碳素钢和合金钢管配件 |
A421/A421M-05 | Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete | 预应力混凝土用无涂层消除应力钢丝的技术规范 |
A423/A423M-95(2004) | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes | 无缝和电焊低合金钢管 |
A424-06 | Standard Specification for Steel, Sheet, for Porcelain Enameling | 搪瓷用钢薄板 |
A426/A426M-05 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | 高温用离心铸造的铁素体合金钢管 |
A427-02 | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction | 冷轧和热轧用锻制合金钢辊 |
A428/A428M-01 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | 钢铁制品上铝覆层重量的测试方法 |
A434-06 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | 热轧与冷精轧经回火及淬火的合金钢棒 |
A435/A435M-90(2001) | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates | 钢板的直射束纵向超声波检验 |
A436-84(2001) | Standard Specification for Austenitic Gray Iron Castings | 奥氏体灰口铁铸件 |
A437/A437M-06 | Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service | 高温用经特殊处理的涡轮型合金钢螺栓材料 |
A439-83(2004) | Standard Specification for Austenitic Ductile Iron Castings | 奥氏体可锻铸铁铸件 |
A447/A447M-93(2003) | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service | 高温用镍铬铁合金钢铸件(25-12级) |
A449-04b | Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | 经淬火和回火的钢螺栓和螺柱 |
A450/A450M-04a | Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes | 碳素钢管、铁素体合金钢管及奥氏体合金钢管 |
A451/A451M-02 | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | 高温用离心铸造的奥氏体钢管 |
A453/A453M-04 | Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels | 具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料 |
A455/A455M-03 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | 压力容器用高强度碳锰钢板 |
A456/A456M-99(2003) | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings | 大型曲轴锻件的磁粉检查 |
A459-97(2003) | Standard Specification for Zinc-Coated Flat Steel Armoring Tape | 镀锌平轧扁钢铠装带 |
A460-94(2004)e1 | Standard Specification for Copper-Clad Steel Wire Strand | 包铜钢丝绳标准 |
A463/A463M-05 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process | 热浸镀铝薄钢板 |
A466/A466M-01 | Standard Specification for Weldless Chain | 非焊接碳素钢链 |
A467/A467M-01(2006) | Standard Specification for Machine and Coil Chain | 机器链和盘旋链 |
A469/A469M-06 | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors | 用于发电机转子的真空处理钢锻件 |
A470/A470M-05 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts | 涡轮机转子和轴用经真空处理的碳素钢和合金锻件 |
A471-06 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | 涡轮转子转盘和转轮用真空处理合金钢锻件技术规范 红飘带之歌 |
A472/A472M-05 | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings | 蒸汽涡轮机轴及转子锻件的热稳定性的试验方法 |
A473-01 | Standard Specification for Stainless Steel Forgings | 不锈和耐热钢锻件 |
A474-03 | Standard Specification for Aluminum-Coated Steel Wire Strand | 包铝钢丝绳标准 |
A475-03 | Standard Specification for Zinc-Coated Steel Wire Strand | 镀锌钢丝绳 |
A476/A476M-00(2005) | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls | 造纸厂干燥辊用球墨可锻铸铁件 |
A478-97(2002) | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire | 铬镍不锈钢和耐热钢制编织钢丝 |
A479/A479M-06a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 锅炉及压力容器用不锈钢和耐热钢棒与型材 |
A480/A480M-06a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 扁平轧制耐热不锈钢厚板材、薄板材和带材通用要求 |
A481-05 | Standard Specification for Chromium Metal | 金属铬 |
优衣库女主自杀A482-05 | Standard Specification for Ferrochrome-Silicon | 铬铁硅 |
A483-04 | Standard Specification for Silicomanganese | 硅锰合金 |
A484/A484M-06a | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings | 不锈及耐热锻钢棒,钢坯及锻件的规格 |
A485-03 | Standard Specification for High Hardenability Antifriction Bearing Steel | 高淬透性耐磨轴承钢的技术规范 |
A487/A487M-93(2003) | Standard Specification for Steel Castings Suitable for Pressure Service | 受压钢铸件 |
A488/A488M-04 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel | 钢铸件焊接规程和工作人员的合格鉴定 |
A489-04 | Standard Specification for Carbon Steel Lifting Eyes | 碳素钢吊耳 |
A490M-04a | Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] | 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓 |
A490-06 | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength | 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓 |
A491-03 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric | 镀铝钢链环栏栅结构 |
A492-95(2004) | Standard Specification for Stainless Steel Rope Wire | 耐热不锈钢丝绳 |
A493-95(2004) | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging | 冷镦和冷锻不锈钢和耐热钢丝 |
A494/A494M-05 | Standard Specification for Castings, Nickel and Nickel Alloy | 镍和镍合金铸件 |
A495-06 | Standard Specification for Calcium-Silicon Alloys | 硅钙合金钢技术规范 |
A496/A496M-05 | Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement | 钢筋混凝土用变形钢丝 |
A497/A497M-06e1 | Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete | 钢筋混凝土用焊接变形钢丝网 |
A498-04 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | 无缝与焊接碳素钢,铁素体钢与奥氏体钢制有整体散热片的换热器钢管 |
A499-89(2002) | Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails | 轧制丁字钢轨用的碳素钢棒材及型材的技术规范 |
A500-03a | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | 圆形与异型焊接与无缝碳素钢结构管 |
A501-01(2005) | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | 热成型焊接与无缝碳素钢结构管 |
A502-03 | Standard Specification for Rivets, Steel, Structural | 结构钢铆钉规范 |
A503/A503M-01(2006) | Standard Specification for Ultrasonic Examination of Forged Crankshafts | 锻制大型曲轴的超声波检验 |
A504/A504M-04e1 | Standard Specification for Wrought Carbon Steel Wheels | 锻制碳素钢轮 |
A505-00(2005) | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | 热轧和冷轧合金钢薄板和带材 |
A506-05 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | 正规质量及优质结构的热轧和冷轧合金钢薄板与带材 |
A507-06 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | 优质拉拔,热轧和冷轧合金钢薄板与带材 |
A508/A508M-05b | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels | 压力容器用经回火和淬火真空处理的碳素钢与合金钢锻件 |
A510-03 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel | 碳素钢盘条和粗圆钢丝通用要求 |
A510M-03 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] | 碳素钢盘条和粗圆钢丝通用要求 |
A511-04 | Standard Specification for Seamless Stainless Steel Mechanical Tubing | 无缝不锈钢机械管 |
A512-96(2005) | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing | 冷拉对缝焊碳素钢机械管 |
A513-06 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing | 电阻焊碳素钢与合金钢机械钢管 |
A514/A514M-05 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | 焊接用经回火与淬火的高屈服强度合金钢板 |
A515/A515M-03 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service | 中温及高温压力容器用碳素钢板 |
A516/A516M-06 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service | 中温及低温压力容器用碳素钢板 |
A517/A517M-06 | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered | 压力容器用经回火与淬火的高强度合金钢板 |
A518/A518M-99(2003) | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings | 耐蚀高硅铁铸件 |
A519-03 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing | 无缝碳素钢与合金钢机械管 |
A521-03 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use | 一般工业用闭式模钢锻件 |
A522/A522M-01 | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | 低温用锻制或轧制含镍8%和9%的合金钢法兰,配件,阀门和零件规格 |
A523-96(2005) | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits | 高压管型电缆线路用平端无缝与电阻焊钢管 |
A524-96(2005) | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | 常温和低温用无缝碳素钢管 |
A529/A529M-05 | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality | 高强度碳锰结构钢质量 |
A530/A530M-04a | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe | 特种碳素钢和合金钢管 |
A531/A531M-91(2006) | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings | 涡轮发电机钢定位环的超声波检验 |
A532/A532M-93a(2003) | Standard Specification for Abrasion-Resistant Cast Irons | 耐磨铸铁 |
A533/A533M-93(2004)e1 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | 压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 |
A534-04 | Standard Specification for Carburizing Steels for Anti-Friction Bearings | 用于耐摩擦轴承的渗碳钢 |
A536-84(2004) | Standard Specification for Ductile Iron Castings | 球墨铸铁件 |
A537/A537M-06 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | 压力容器用经热处理的碳锰硅钢板 |
A540/A540M-06 | Standard Specification for Alloy-Steel Bolting Materials for Special Applications | 特殊用途的合金钢螺栓材料 |
A541/A541M-05 | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components | 压力容器部件用经淬火和回火的碳素钢及合金钢锻件 |
A542/A542M-99(2004)e1 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium | 压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板 |
A543/A543M-93(2004)e1 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum | 压力容器用经回火和淬火的镍铬钼合金钢板 |
A550-06 | Standard Specification for Ferrocolumbium | 铌铁合金 |
A551/A551M-05 | Standard Specification for Steel Tires | 钢轮箍 |
A553/A553M-06 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel | 压力容器用经回火和淬火的含8%及9%镍的合金钢板 |
A554-03 | Standard Specification for Welded Stainless Steel Mechanical Tubing | 焊接的无缝钢机械管 |
A555/A555M-05 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods | 耐热不锈钢丝和盘条的通用要求 |
A556/A556M-96(2005) | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | 无缝冷拉碳素钢给水加热器管 |
A560/A560M-05 | Standard Specification for Castings, Chromium-Nickel Alloy | 铬镍合金铸件 |
A561-71(2004) | Standard Practice for Macrotech Testing of Tool Steel Bars | 工具钢棒的宏观刻蚀试验 |
A562/A562M-06 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings | 搪玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 |
A563-04a | Standard Specification for Carbon and Alloy Steel Nuts | 碳合金钢螺母 |
A563M-06 | Standard Specification for Carbon and Alloy Steel Nuts [Metric) | 碳素钢及合金钢螺母技术规范(米制) |
A564/A564M-04 | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes | 热轧及冷精轧时效硬化处理过的不锈钢棒材和型材技术规范 |
A565/A565M-05a | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service | 高温用马氏体不锈钢棒,锻件和锻制坯规格 |
A568/A568M-06a | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | 热轧及冷轧高强度低合金碳素钢薄板 |
A571/A571M-01(2006) | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service | 适用于低温压力容器零件的奥氏体球墨铸铁件 |
A572/A572M-06 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel | 高强度低合金钴钒结构钢技术规范 |
A573/A573M-05 | Standard Specification for Structural Carbon Steel Plates of Improved Toughness | 增强韧性的结构碳素钢板 |
A574-04 | Standard Specification for Alloy Steel Socket-Head Cap Screws | 合金钢内六角螺钉 |
A574M-04 | Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] | 合金钢内六角螺钉(米制) |
A575-96(2002) | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades | 商品级碳素钢棒(M级) |
A576-90b(2006) | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality | 特级热轧碳素钢棒 |
A577/A577M-90(2001) | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates | 钢板的超声角波束检验 |
A578/A578M-96(2001) | Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications | 特殊设备用的普通钢板和包覆钢板的直波束超声探伤检验 |
A579/A579M-04a | Standard Specification for Superstrength Alloy Steel Forgings | 超高强度合金钢锻件 |
A580/A580M-06 | Standard Specification for Stainless Steel Wire | 耐热不锈钢丝 |
A581/A581M-95b(2004) | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods | 高速切削用耐热不锈钢丝和盘条 |
A582/A582M-05 | Standard Specification for Free-Machining Stainless Steel Bars | 热轧或冷精轧的高速切削不锈及耐热钢棒 |
A586-04a | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand | 镀锌平行和螺旋形钢丝绳 |
A587-96(2005) | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry | 化学工业用电阻焊低碳钢管 |
A588/A588M-05 | Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick | 高强度低合金结构钢4英寸(100mm)厚屈服点最小为50ksi(345MPa) |
A589/A589M-06 | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe | 水井用无缝和焊接碳素钢管 |
A592/A592M-04 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels | 压力容器用经回火和淬火的高强度低合金钢锻制附件和零件 |
A595/A595M-06 | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use | 结构用圆锥形低碳钢管 |
A596/A596M-95(2004) | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens | 用环形试验法和冲击法测定材料的直流磁性能的试验方法 |
A597-87(2004) | Standard Specification for Cast Tool Steel | 铸造工具钢 |
A598/A598M-02 | Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores | 磁放大器磁芯的磁性能测试法 |
A599/A599M-02 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet | 锡制品,电解镀锡的冷滚轧薄板规范 |
A600-92a(2004) | Standard Specification for Tool Steel High Speed | 高速工具钢 |
A601-05 | Standard Specification for Electrolytic Manganese Metal | 电解金属锰 |
A602-94(2004) | Standard Specification for Automotive Malleable Iron Castings | 汽车用可锻铸铁件 |
A603-98(2003) | Standard Specification for Zinc-Coated Steel Structural Wire Rope | 镀锌结构钢丝绳 |
A604-93(2003) | Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets | 自耗电极再溶化钢棒与钢坯的宏观腐蚀试验方法 |
A606-04 | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance | 改进防大气腐蚀性的热轧和冷轧高强度低合金钢薄板和带材 |
A608/A608M-02 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures | 高温受压离心铸造的铁铬镍高合金钢管 |
A609/A609M-91(2002) | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof | 碳素钢,低合金钢和马氏体不锈钢铸件的超声波检测 |
A610-79(2004) | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size | 尺寸测量用铁合金的取样和试验 |
A612/A612M-03 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service | 中温和低温压力容器用高强度碳素钢板 |
A615/A615M-06a | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | 钢筋混凝土配筋用变形和光面坯钢筋 |
A618/A618M-04 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing | 热成型焊接和无缝高强度低合金结构钢管 |
A623-06 | Standard Specification for Tin Mill Products, General Requirements | 锡轧制产品 |
A623M-06 | Standard Specification for Tin Mill Products, General Requirements [Metric] | 镀锡薄钢板轧制品通用要求(米制) |
A624/A624M-03 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced | 锡辊轧制品.单压延电解马口铁 |
A625/A625M-03 | Standard Specification for Tin Mill Products, Black Plate, Single Reduced | 一次轧制原钢板(未镀)和镀锡薄钢板轧制产品技术规范 |
A626/A626M-03 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced | 二次压延电解镀锡厚钢板轧制品技术规范 |
A627-03 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities | 安全设备用均质不易加工的钢棒 |
A630-03 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate | 热浸电解镀锡板镀锡层重量测定的方法 |
A632-04 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | 通用无缝和焊接奥氏体不锈钢管(小直径) |
A633/A633M-01(2006) | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates | 正火的高强度低合金结构钢 |
A635/A635M-06a | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for | 热轧碳素钢薄板,带材和重型粗盘条规格 |
A636-76(2004) | Standard Specification for Nickel Oxide Sinter | 氧化镍烧结块 |
A638/A638M-00(2004) | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service | 高温用沉积硬化铁基超级合金棒,锻件及锻坯料 |
A640-97(2002)e1 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | 8字型缆吊架用镀锌钢丝绳 |
A641/A641M-03 | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire | 镀锌(电镀)碳素钢丝技术规范 |
A644-05 | Standard Terminology Relating to Iron Castings | 铁铸件的相关术语 |
A645/A645M-05 | Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated | 压力容器用经特殊热处理的5%镍合金钢板 |
A646/A646M-04 | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings | 飞机及航空器锻件用优质合金钢大方坯及坯段 |
A648-04a | Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe | 预应力混凝土管用冷拉钢丝 |
A649/A649M-04 | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery | 波纹纸机械用锻制钢辊规格 |
A650/A650M-03 | Standard Specification for Tin Mill Products, Black Plate, Double Reduced | 二次压延的锡轧黑板材 |
A653/A653M-06 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | 热浸处理的镀锌铁合金或镀锌合金薄钢板的标准规范 |
A656/A656M-05e1 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability | 具有改良可模锻性的高强度低合金热轧结构钢板 |
A657/A657M-03 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced | 一次和二次压延电解镀铬黑钢板轧制品技术规范 |
A659/A659M-97(2001) | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled | 商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%) |
A660-96(2005) | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | 高温用离心铸造碳素钢管 |
A662/A662M-03 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | 中温和低温压力容器用锰碳钢板规格 |
A663/A663M-89(2006) | tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties | 商品级碳素钢棒的机械特性 |
A664-06 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications | 在ASTM规范中对电工钢和层压钢级别的识别 |
A666-03 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar | 退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒 |
A667/A667M-87(2003) | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders | 离心铸造的双金属(灰口及白口铸铁)圆柱体 |
A668/A668M-04 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 一般工业用碳素钢和合金钢锻件 |
A671-06 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | 常温和较低温用电熔焊钢管 |
A672-06 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | 中温高压用电熔焊钢管 |
A673/A673M-05a | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel | 结构钢冲击试验的取样程序 |
A674-05 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids | 水或其它液体用球墨铸铁管的聚乙烯包装 |
A675/A675M-03e1 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | 专用热轧碳素钢棒的机械特性 |
A677-05 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types | 全处理型无取向电工钢 |
A678/A678M-05 | Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates | 结构用经回火和淬火的高强度低合金碳素钢板规格 |
A679/A679M-06 | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn | 硬(冷)拉高抗拉强度钢丝 |
A681-94(2004) | Standard Specification for Tool Steels Alloy | 合金工具钢 |
A682/A682M-05 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For&dup2; | 弹簧用冷轧高碳钢带材 |
A683-05 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types | 半处理型无取向电工钢 |
A684/A684M-86(2002) | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled | 冷轧高碳钢带材 |
A686-92(2004) | Standard Specification for Tool Steel, Carbon | 碳素工具钢 |
A688/A688M-04 | Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes | 焊接的奥氏体不锈钢给水加热器管 |
A689-97(2002) | Standard Specification for Carbon and Alloy Steel Bars for Springs | 弹簧用碳素钢及合金钢棒 |
A690/A690M-05 | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments | 在海洋环境中使用的高强度低合金工字形钢桩和薄板桩规格 |
A691-98(2002) | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures | 高温下高压装置用电熔焊碳素钢和合金钢管 |
A693-06 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 沉淀硬化耐热不锈钢板、薄板和带材 |
A694/A694M-03 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service | 高压传输设备用碳素钢及合金钢管法兰、配件、阀门及零件用锻件 |
A696-90a(2006) | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components | 压力管道部件专用热锻或冷精轧碳素钢棒 |
A697/A697M-03 | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods | 用伏特计、安培计和瓦特计法测定迭层铁芯样品的交流磁特性的试验方法 |
A698/A698M-02 | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields | 在弱交流磁场中磁屏蔽效率的试验方法 |
A700-05 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment | 钢制品国内装运的包装、标记和装载方法 |
A701-05 | Standard Specification for Ferromanganese-Silicon | 硅锰铁 |
A702-89(2006) | Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought | 热锻钢栅栏柱和组件 |
A703/A703M-05 | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts | 受压部件用钢铸件 |
A704/A704M-06 | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement | 混凝土加筋用焊接普通钢棒或杆的光面钢筋或钢筋网 |
A705/A705M-95(2004) | Standard Specification for Age-Hardening Stainless Steel Forgings | 时效硬化的不锈和耐热钢锻件 |
A706/A706M-06a | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement | 混凝土配筋用变形低合金光面无节钢筋 |
A707/A707M-02 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service | 低温设备用锻制碳素钢和合金钢法兰 |
A709/A709M-06 | Standard Specification for Structural Steel for Bridges | 桥梁用结构钢 |
A710/A710M-02 | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates | 低碳时效硬化的镍铜铬钼铌合金钢 |
A711-04 | Standard Specification for Steel Forging Stock | 钢锻件坯料 |
A712-97(2002) | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | 软磁性合金电阻率的测试方法 |
A713-04 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components | 热处理部件用高碳弹簧钢丝 |
A714-99(2003) | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe | 高强度低合金焊接钢管和无缝钢管 |
A716-03 | Standard Specification for Ductile Iron Culvert Pipe | 球墨铸铁涵洞管 |
A717/A717M-06 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | 单片样品表面绝缘电阻率的试验方法 |
A719/A719M-02 | Standard Test Method for Lamination Factor of Magnetic Materials | 磁性材料的叠装系数的试验方法 |
A720/A720M-02 | Standard Test Method for Ductility of Nonoriented Electrical Steel | 无取向电工钢延展性的试验方法 |
A721/A721M-02 | Standard Test Method for Ductility of Oriented Electrical Steel | 取向的电工钢的延展性试验方法 |
A722/A722M-05 | Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete | 预应力混凝土用无涂覆的高强度钢筋 |
A723/A723M-02 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application | 高强度压力元件用合金钢锻件 |
A724/A724M-04 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels | 叠层焊接的压力容器用经淬火及回火的碳素钢压力容器板 |
A726-05 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types | 半成品型冷轧磁性迭片级钢 |
A727/A727M-02 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness | 具有固定切口韧性的管道部件用碳素钢锻件 |
A729/A729M-05a | Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service | 货物运输及电气铁路用热处理合金钢轴 |
A732/A732M-05 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | 一般设备用熔模铸造碳素低合金钢及高强度加温钴合金钢铸件 |
A733-03 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | 焊接及无缝碳素钢和奥氏体不锈钢管接头 |
A734/A734M-87a(2003) | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered | 经淬火和回火的合金钢与高强度低合金钢压力容器板 |
A735/A735M-03 | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service | 中温和低温用低碳锰钼钶合金钢压力容器板 |
A736/A736M-03 | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel | 低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板 |
A737/A737M-99(2004) | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel | 高强度低合金钢压力容器板 |
A738/A738M-05 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | 中温和低温设备用经热处理的碳锰硅钢压力容器板 |
A739-90a(2006) | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both | 升温或/和加压部件用热轧合金钢棒 |
A740-98(2003) | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) | 钢丝网(编织或焊接电镀钢丝网) |
A741-98(2003) | Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail | 公路护栏用镀锌钢丝绳和配件 |
A742/A742M-03 | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe | 波纹钢管用预涂聚合物和金属涂覆钢薄板 |
A743/A743M-06 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | 一般用耐腐蚀铬铁及镍铬铁合金铸件 |
A744/A744M-06 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 严酷条件下使用的耐腐蚀镍铬铁合金铸件 |
A745/A745M-94(2003) | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings | 奥氏体钢锻件的超声波检验 |
A746-03 | Standard Specification for Ductile Iron Gravity Sewer Pipe | 排污管用球墨铸铁 |
A747/A747M-04 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening | 沉淀硬化不锈钢铸件 |
A748/A748M-87(2003) | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use | 压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊 |
A749/A749M-97(2002) | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for | 热轧碳素钢和高强度低合金钢带材通用要求 |
A751-01(2006) | Standard Test Methods, Practices, and Termninology for Chemical Analysis of Steel Products | 钢制品化学分析的实验方法、操作和术语 |
A752-04 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel | 合金钢条和粗圆钢丝 |
A752M-04 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] | 合金钢条和粗圆钢丝(米制) |
A753-02 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) | 镍铁软磁合金 |
A754/A754M-06 | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence | X射线荧光涂层厚度的试验方法 |
A755/A755M-03 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products | 外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板 |
A756-94(2001) | Standard Specification for Stainless Anti-Friction Bearing Steel | 耐磨不锈轴承钢 |
A757/A757M-00(2004) | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service | 低温下承压设备及其它设备用铁素体和马氏体钢铸件 |
A758/A758M-00(2005) | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness | 具有改进的切口韧性的对缝焊锻制碳素钢管配件 |
A759-00(2005) | Standard Specification for Carbon Steel Crane Rails | 起重机用碳钢轨条 |
A760/A760M-06 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains | 下水道和排水沟用金属涂覆的波纹钢管 |
A761/A761M-04 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches | 现场栓接管、管拱和拱用波纹镀锌结构钢板 |
A762/A762M-00 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains | 下水道和排水沟用预涂聚合物波纹钢管 |
A763-93(2004) | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels | 铁素体不锈钢晶间腐蚀敏感性检测 |
A764-95(2001) | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs | 机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝 |
A765/A765M-04 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements | 具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件 |
A767/A767M-05 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement | 钢筋混凝土用镀锌钢筋 |
A768/A768M-05 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts | 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件 |
A769/A769M-05 | Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes | 电阻焊钢结构型材 |
A770/A770M-03 | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications | 专用钢板通过厚度测量进行的抗拉试验 |
A772/A772M-00(2005) | Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current | 正弦电流用材料的交流磁导率的试验方法 |
A773/A773M-01 | Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs | 用带直流电子的磁滞曲线记录仪的(B-H)回路法测量材料的磁性能的标准试验方法 |
A774/A774M-06 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | 低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件 |
A775/A775M-06 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | 涂环氧树脂的钢筋钢棒 |
A778-01 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products | 焊接未退火的奥氏体不锈钢管形制品 |
A779/A779M-05 | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete | 预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳 |
A780-01 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings | 热浸镀锌层的损坏及无覆层区域的检修 |
A781/A781M-06 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use | 一般工业用一般要求的钢和合金铸件 |
A782/A782M-06 | Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel | 经淬火和回火的锰铬钼硅锆合金钢压力容器板 |
A786/A786M-05 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates | 轧制钢楼板 |
A787-05 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing | 电阻焊金属涂覆碳素钢机械配管 |
A788/A788M-05c | Standard Specification for Steel Forgings, General Requirements | 钢锻件 |
A789/A789M-05b | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | 普通设备用无缝与焊接铁素体/奥氏体不锈钢管 |
A790/A790M-05b | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe | 无缝与焊接铁素体/奥氏体不锈钢管 |
A792/A792M-06 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | 热浸工艺法处理的55%铝-锌合金涂覆钢板 |
A793-96(2001) | Standard Specification for Rolled Floor Plate, Stainless Steel | 不锈钢轧制楼板 |
A794-97(2002) | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled | 商品级冷轧碳素钢薄板(最高含碳量为0.16%-0.25%) |
A795/A795M-04 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use | 防火用黑及热浸镀锌的焊接和无缝钢管 |
A796/A796M-06 | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications | 雨水管和卫生污水管及其它地下埋设管道用波纹钢管、管托架及拱形架结构设计惯例 |
A798/A798M-01 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | 下水道及其它类似用途用工厂制波纹钢管的安装 |
A799/A799M-04 | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content | 估算不锈钢铸件铁素体含量用仪表的校准 |
A800/A800M-01(2006) | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 奥氏体合金钢铸件中铁素体含量的估算 |
A801-04 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | 铁钴高磁性饱和合金 |
A802/A802M-95(2006) | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination | 钢铸件外观检验的表面验收标准 |
A803/A803M-03 | Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes | 焊接铁素体不锈钢给水加热器管 |
A804/A804M-04 | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens | 在电力频率下用薄钢板型试样对材料交流磁特性的测试方法 |
A805-93(2002) | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled | 冷轧碳素钢扁平线 |
A807/A807M-02e1 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications | 下水道及其它类似用途用波纹结构钢涂覆管的安装 |
A809-03 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire | 镀铝碳素钢丝 |
A810-01 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh | 镀锌钢管用绕网 |
A811-03 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques | 粉末冶金技术制造的软磁铁零件 |
A813/A813M-01(2005) | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe | 单或双焊接奥氏体不锈钢管 |
A814/A814M-05 | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe | 冷加工焊接奥氏体不锈钢管 |
A815/A815M-04 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings | 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件 |
A817-03 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire | 链接栅栏网用金属涂覆钢丝 |
A818-06 | Standard Specification for Coppered Carbon Steel Wire | 镀铜碳素钢丝 |
A820/A820M-06 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete | 纤维增强混凝土用钢纤维 |
A821/A821M-05 | Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks | 预应力混凝土容器用经回火的冷拉钢丝 |
A822/A822M-04 | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service | 液压系统设备用冷拉碳素无缝钢管 |
A823-99(2003) | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings | 静铸永久铸模灰铸件 |
A824-01 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence | 链接栅栏用Marcelled拉力金属涂覆钢丝 |
A827/A827M-02 | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications | 锻造及类似用途用的碳素钢板技术规范 |
A829/A829M-04 | Standard Specification for Alloy Structural Steel Plates | 结构性合金钢板 |
A830/A830M-02 | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements | 按照化学成分要求提供的优质碳素钢板技术规范 |
A832/A832M-06 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium | 压力容器板用铬钼钒及铬钼钒钛硼合金钢 |
A833-84(2001) | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | 用比较硬度测试仪测量金属材料的压痕硬性 |
A834-95(2001) | Standard Specification for Common Requirements for Iron Castings for General Industrial Use | 一般工业用铁铸件的一般要求 |
A835/A835M-84(2005) | Standard Specification for Sizes of Ferroalloys and Alloy Additives | 铁合金与合金添加剂的筛分粒度 |
A836/A836M-02 | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | 搪瓷管和压力容器设备用钛稳定碳素体钢锻件 |
A837/A837M-06 | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | 渗碳用合金钢锻件 |
A838-02 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications | 继电器用易切削铁素体不锈软磁合金技术规范 |
A839-02 | Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications | 软磁用途的磷铁粉末冶金制造的零件技术规范 |
A840/A840M-00(2006) | Standard Specification for Fully Processed Magnetic Lamination Steel | 全处理的磁性夹层钢 |
A841/A841M-03a | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) | 压力容器用温度机械控制工艺加工的钢板 |
A842-85(2004) | Standard Specification for Compacted Graphite Iron Castings | 高密度石墨铸铁 |
A844/A844M-04 | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process | 压力容器用直接淬火加工的含镍9%的合金钢板 |
A847/A847M-05 | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | 具有增强耐大气腐蚀性能的冷成型焊接与无缝高强度低合金结构管 |
A848-01(2006) | Standard Specification for Low-Carbon Magnetic Iron | 低碳磁铁 |
A849-00(2005) | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | 波纹钢排水管和污水管用后涂覆铺面和衬里材料 |
A852/A852M-03 | Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick | 最小屈服强度为70Ksi(485MPa),厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板 |
A853-04 | Standard Specification for Steel Wire, Carbon, for General Use | 普通碳素钢丝 |
A854/A854M-98(2003) | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | 镀锌高强度钢栅栏和格架用光滑金属线 |
A855/A855M-03 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | 锌-5%铝-铈合金涂覆的钢丝绳 |
A856/A856M-03 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire | 锌-5%铝-铈合金涂覆的碳素钢丝 |
A857/A857M-05 | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage | 冷成形轻型薄钢板桩 |
A858/A858M-06 | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service | 低温和腐蚀情况下用热处理碳素钢配件 |
A859/A859M-04 | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | 压力容器部件用时效硬化镍铜铬钼钶低碳合金钢锻件 |
A860/A860M-00(2005) | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings | 锻制高强度低合金钢的高强度对缝焊接配件 |
A861-04 | Standard Specification for High-Silicon Iron Pipe and Fittings | 高硅铁管和配件 |
A862/A862M-98(2003) | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | 波纹钢污水管和排水管沥清(柏油)涂层的应用 |
A865/A865M-06 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | 钢管连接用黑或镀锌焊接或无缝钢螺纹接头 |
A866-01 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel | 耐磨中碳轴承钢 |
A867-03 | Standard Specification for Iron-Silicon Relay Steels | 继电器用铁硅钢 |
A871/A871M-03 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance | 抗空气腐蚀的高强度低合金结构钢板 |
A872/A872M-05 | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments | 腐蚀环境下用离心铸造铁素体/奥氏体不锈钢管 |
A874/A874M-98(2004) | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | 适于低温使用的铁素体球墨铸铁铸件 |
A875/A875M-05 | Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process | 热浸处理的锌-5%铝合金金属涂覆的钢薄板 |
A876-03 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types | 全处理型平轧的晶粒取向的硅铁电工钢 |
A877/A877M-05 | Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality | 铬硅合金阀弹簧级钢丝 |
A878/A878M-05 | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality | 经改良的铬钒阀弹簧级钢丝 |
A879/A879M-04 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | 每面镀层质量应予标明的电解镀锌薄钢板 |
A881/A881M-05 | Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties | 预应力混凝土铁路轨枕用应力消除或应力松弛变形钢丝 |
A882/A882M-04a | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand | 涂环氧树脂的七股预应力钢丝绳 |
A884/A884M-04 | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | 钢筋用涂环氧树脂的钢丝与焊接钢丝织网的技术规范 |
A886/A886M-05 | Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete | 预应力混凝土用应力消除的七股齿纹钢丝绳 |
A887-89(2004) | Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application | 核能设备用经硼酸处理的不锈钢板、薄板及带材 |
A888-05 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | 下水管、雨水管、污水管和排气管道用无衬套铸铁管和配件 |
A889/A889M-03 | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame | 在低感应条件下用万用表法和25厘米艾普斯亭(Epstein)框测定材料的交流磁特性的试验方法 |
A890/A890M-99(2003) | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application | 普通应用的铁铬镍钼耐腐蚀双重(奥氏体/铁素体)铸件 |
A891-98(2003) | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels | 涡轮机转子圆盘和轮用沉淀硬化铁基超合金钢锻件 |
A892-88(2001) | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels | 高碳轴承钢微观结构的定义和等级 |
A893/A893M-03 | Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies | 微波频率下非金属磁性材料复合介电常数的测试方法 |
A894/A894M-00(2005) | Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials | 非金磁性材料的饱和磁化强度或磁感应性能的标准试验方法 |
A895-89(2004) | Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip | 易切削不锈钢板、薄板和带材 |
A896-89(2004) | Standard Practice for Conducting Case Studies on Galvanized Structures | 电镀结构导电壳的研究 |
A897/A897M-06 | Standard Specification for Austempered Ductile Iron Castings | 等温淬火球墨铸铁 |
A898/A898M-91(2001) | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes | 轧制结构钢型材的直束超声检验 |
A899-91(2002) | Standard Specification for Steel Wire, Epoxy-Coated | 环氧涂层钢丝 |
A900/A900M-01(2006) | Standard Test Method for Lamination Factor of Amorphous Magnetic Strip | 非晶磁性带材叠装系数的测试方法 |
A901-03 | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types | 半成品型非晶形磁芯合金 |
A902-06 | Standard Termninology Relating to Metallic Coated Steel Products | 与金属涂覆的钢制品有关的标准技术术语 |
A903/A903M-99(2003) | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection | 钢铸件磁粉探伤和荧光渗透检验的表面验收标准 |
A904-04 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts | 50镍-50铁粉末冶金(P/M)软磁合金 |
A905-04 | Standard Specification for Steel Wire, Pressure Vessel Winding | 压力容器缠绕用钢丝 |
A906/A906M-02 | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | 高架提升设备用的80级和100级合金钢悬链规范 |
A908-03 | Standard Specification for Stainless Steel Needle Tubing | 不锈钢针管 |
A909-03 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use | 一般企业用微合金钢锻件 |
A910/A910M-05 | Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete | 预应力混凝土用无涂层、无焊缝、2股及3股钢绞绳 |
A911/A911M-05 | Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties | 预应力混凝土轨枕用无涂层的预应力消除的钢棒 |
A912/A912M-04 | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens | 用万用表环形样品法测试非晶材料在电频率条件下交流磁特性的试验方法 |
A913/A913M-04 | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) | 经淬火和自回火(QST)处理的高强度低合金结构级钢型材 |
A914/A914M-92(2005) | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | 对末端淬火淬透性有限制要求的钢棒材技术规范 |
A915/A915M-93(2003) | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades | 化学要求同锻件类似的碳素钢和合金钢 |
A917-06 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | 要求每一面标识有镀层质量用的电解工艺涂层的薄钢板材标准规范 |
A918-00(2005) | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | 要求在每一面标识有涂层质量用电解工艺镀锌镍合金的薄钢板技术规范 |
A920/A920M-02a | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | 具有机械特性,微合金,热锻,高质量钢棒的标准规范 |
A921/A921M-93(2005) | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | 后热锻用微合金,高质量,热锻钢棒的标准规范 |
A922-05 | Standard Specification for Silicon Metal | 硅金属标准规范 |
A923-06 | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | 检测锻制双重奥氏体/铁素体不锈钢中有害金属间相的标准试验方法 |
A924/A924M-06 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process | 用热浸镀法对薄钢板金属涂层的一般要求的标准规范 |
A925-03 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | 锌-5%铝.混合稀土合金涂覆钢的地面金属绞线的技术规范 |
A926-03 | Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe | 波纹形金属管用比较涂层材料磨损阻力的标准测试方法 |
A927/A927M-04 | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method | 使用伏特计-电流计-瓦特计方法的环形铁芯交流磁性能的标准试验方法 |
A928/A928M-05 | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal | 加填料金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范 |
A929/A929M-01 | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | 波纹钢管用的经热浸处理的金属镀覆薄钢板标准规范 |
A930-03 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | 涵洞,暴雨下水道和其它地下的排水道用波形金属管的寿命周期费用分析的标准惯例 |
A931-96(2002) | Standard Test Method for Tension Testing of Wire Ropes and Strand | 金属丝绳和绞线拉伸试验的标准试验方法 |
A932/A932M-01(2006) | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens | 用瓦特计-安培计-伏特计和薄钢板样品测试在电源频率下非晶体材料交流磁性能的标准试验方法 |
A933/A933M-95(2001) | Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement | 加筋增强用聚氯乙烯涂层钢丝和焊接钢丝网的标准规范 |
A934/A934M-04 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | 环氧基树脂涂覆的预制增强钢棒的标准规范 |
A937/A937M-01 | Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | 使用临界试验面测定绝缘涂层层间阻力的标准测试方法 |
A938-04 | Standard Test Method for Torsion Testing of Wire | 丝材抗扭试验的标准试验方法 |
A939-96(2006) | Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | 圆柱体锻件镗孔表面反射超声检测的标准试验方法 |
A940/A940M-06 | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors | 涡轮转子用的差温热处理真空处理钢锻件,合金钢锻件的标准规范 |
A941-06a | Termninology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | 钢,不锈钢,有关合金和铁合金术语 |
A942-95(2001) | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells | 离心铸造白口铁/灰口铁双金属耐磨滚轮外壳标准规范 |
A943/A943M-01(2005) | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | 喷模制无缝奥氏体不锈钢管的技术规范 |
A944-05 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | 用梁端试样与混凝土比较的钢筋棒结合强度标准试验方法 |
A945/A945M-05e1 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness | 为改良可焊接性、可加工性及粘接性用低碳限硫的高强度低合金结构钢板的标准规范 |
A946-95(2004) | Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service | 耐腐蚀和耐热用铬,铬-镍和硅合金钢板,薄板和带的标准规范 |
A947M-95(2004) | Standard Specification for Textured Stainless Steel Sheet [Metric] | 织构化不锈钢薄板的标准规范 |
A949/A949M-01(2005) | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | 喷模制无缝铁素体/奥氏体不锈钢管的标准规范 |
A950/A950M-99(2003) | Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | 涂有熔融胶接环氧树脂的结构钢H型钢桩和薄板桩技术规范 |
A951-02 | Standard Specification for Masonry Joint Reinforcement | 砌体接缝配筋的技术规范 |
A952/A952M-02 | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | 锻制80号和100号钢提升元件和焊接联接杆技术规范 |
A955/A955M-06a | Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement | 混凝土增强的变形的和无节钢筋技术规范 |
A956-02 | Standard Test Method for Leeb Hardness Testing of Steel Products | 钢制品依阔提皮(Equotip)硬度测试方法 | 台湾小甜甜
A957/A957M-06 | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | 一般工业用普通要求熔模铸造的钢及合金钢熔模铸件技术规范 |
A958-00(2006) | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | 拉伸要求及化学要求类似于标准铸造等级的碳钢和合金钢铸件的技术规范 |
A959-04 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | 锻制不锈钢用说明协调标准等级构成的标准指南 |
A960/A960M-06 | Standard Specification for Common Requirements for Wrought Steel Piping Fittings | 普通要求的锻制钢管管件的标准规范 |
A961/A961M-05 | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | 管路用钢法兰盘,锻制管接头,阀门和零件的通用要求规范 |
A962/A962M-04a | Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range | 预定用于从低温至蠕变范围内任何温度的钢紧固件或其材料的通用要求 |
A964/A964M-03 | Standard Specification for Corrugated Steel Box Culverts | 波纹钢箱形涵洞规范 |
A965/A965M-06 | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts | 压力和高温零件用奥氏体钢锻件的技术规范 |
A966/A966M-96(2006) | Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current | 用交流电和磁粉探伤检验钢锻件的标准试验方法 |
A967-05 | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts | 不锈钢零件的化学钝化处理的技术规范 |
A968/A968M-96(2001) | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service | 和耐热耐蚀设备用铬,铬镍及硅合金钢棒材及型材的技术规范 |
A970/A970M-06 | Standard Specification for Headed Steel Bars for Concrete Reinforcement | 混凝土配筋用焊接或锻制镦头的棒材技术规范 |
A971/A971M-05 | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | 测量扁平轧制的钢盘条轧边锥(斜)度和凸度的标准试验方法 |
A972/A972M-00(2004) | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | 熔焊的环氧树脂涂层的管桩规范 |
A973/A973M-01 | Standard Specification for Grade 100 Alloy Steel Chain | 100级的合金钢链条规范 |
A974-97(2003) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) | 焊线纤维金属筐和金属丝网的标准规范.(金属涂层或聚氯乙烯(PVC)涂层) |
A975-97(2003) | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) | 双层和扭转网眼金属筐和护墙垫金属和涂层钢线或聚氯乙烯(PVC)金属涂层钢线 |
A976-03 | Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application | 按照成份、相对绝缘能力及用途对绝缘涂层进行分类方法 |
A977/A977M-02 | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs | 用磁滞曲线图测定高矫顽力永久磁性材料磁性的标准试验方法 |
A978/A978M-97(2002)e1 | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications | 重力流动卫生用排污管道,暴雨排污管道用和其他专用的预涂层的和聚乙烯衬料带由复合材料加强肋的钢管规范 |
A979/A979M-03 | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | 外场用波纹钢结构件中填装的混凝土铺料和衬料规范 |
A980-97(2003) | Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled | 冷轧超高强度碳素钢薄钢板技术规范 |
A981-97(2002) | Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors | 评定加预应力地锚使用的270号、直径为15.2毫米(0.6英寸)加预应力连铸钢坯结合强度的标准试验方法 |
A982/A982M-05 | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils | 涡轮叶片用不锈钢锻件技术规范 |
A983/A983M-05 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | 中速柴油发动机用连续晶粒流向锻制的碳素钢及合金钢曲轴技术规范 |
A984/A984M-03 | Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded | 电阻焊焊接的平滑端黑钢管技术规范 |
A985/A985M-04a | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts | 容压件使用的熔模钢铸件通用技术要求 |
A986/A986M-01(2006) | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | 连续晶粒流向曲轴锻件的磁粉探伤检查技术规范 |
A987-05 | Standard Test Method for Measuring Shape Characteristics of Tin Mill Products | 镀锡薄钢板轧制产品形状特性测量的标准试验方法 |
A988/A988M-05 | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | 高温下使用的热等静加压成形的不锈钢法兰盘、管配件、阀及零件的技术规范 |
A989/A989M-05 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | 高温下使用的热等静加压成形的合金钢法兰盘、管配件、阀及零件的技术规范 |
A990-05 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service | 耐腐用保压零件用特殊控制阀的铁铬镍和铬合金铸件技术规范 |
A991/A991M-98(2004) | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | 钢制品热处理炉温度均匀度测量标准试验方法 |
A992/A992M-06a | Standard Specification for Structural Steel Shapes | 建筑框架中使用的结构成型件钢规范 |
A994-05 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys | 钢,不锈钢及相关合金的产品规范编辑程序和格式指南 |
A995/A995M-98(2003) | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts | 容压件用奥氏体-铁素体(用二联法)不锈钢铸件技术规范 |
A996/A996M-06a | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement | 混凝土用条钢和车轴钢变形钢棒规范 |
A997-98(2003)e1 | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination | 熔模铸件目视检查表面验收标准的标准惯例 |
A998/A998M-98(2003) | Standard Practice for Structural Design of Reinforcements for Fittings in Factory—Made Corrugated Steel Pipe for Sewers and Other Applications | 下水道及相关用途的工厂加工的波纹钢管的加强型接头的结果设计指南 |
A999/A999M-04a | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | 合金钢和不锈钢管通用要求规范 |
A1000-05 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality | 弹簧专用碳钢和合金钢钢丝规范 |
A1001-01(2006) | Standard Specification for High Strength Steel Castings in Heavy Sections | 大型材高强度钢铸件规范 |
A1002-99(2003) | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy | 镍铝类合金铸件规范 |
A1003/A1003M-05 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members | 具有金属及非金属涂层的冷处理成型结构件碳钢板规范 |
A1004/A1004M-99(2004) | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members | 确定用于冷成形的框架构件的金属,被涂覆的金属,和非金属涂覆钢板材的最小预期腐蚀特性的标准惯例 |
A1005/A1005M-00(2004) | Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded | 创意早餐店双埋弧焊、带纵向的和螺旋状的缝、平头钢管规范 |
A1006/A1006M-00(2004) | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded | 激光束焊、平头、无镀层、钢制总管的标准规范 |
A1007-02 | Standard Specification for Carbon Steel Wire for Wire Rope | 钢索用碳钢丝规范 |
A1008/A1008M-05b | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | 高强度低合金和改性高强度低合金冷轧结构碳钢板材规范 |
A1009-05 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications | 高频(10kHz-1 MHz)电力变压器和滤波感应器用软磁MnZn铁芯材料标准规范 |
A1010/A1010M-01e1 | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip | 更高强度马氏体不锈钢板,薄板和带的技术规范 |
A1011/A1011M-06 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | 高强度低合金和改型高强度低合金热轧结构碳钢板材和带材规范 |
A1012-02 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins | 无缝铁索体,奥氏体和二联合金钢冷凝器和带整体散热片的热交换管的规范 |
A1013-00(2005) | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method | 用伏特计、安培计和瓦特计测定可控温度下软磁芯部件的高频(10 kHz-1 MHz)磁芯损耗的标准试验方法 |
A1014/A1014M-06 | Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service | 高温下使用的沉淀硬化螺栓连接材料规范(UNS N07718) |
A1015-01(2005) | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications | 公共卫生设备管道产品可视管道镜检查指南 |
A1016/A1016M-04a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 铁索体合金钢,奥氏体合金钢和不锈钢钢管的通用要求规范 |
A1017/A1017M-06 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten | 压力容器铬-钼-钨合金钢板规范 |
A1018/A1018M-06b | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel | 含铌或钒的高强度低合金和改性高强度低合金热轧厚镀锡卷板结构碳钢板材和带材规范 |
A1019/A1019M-01 | Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains | 下水道和排水管路用的有聚合物滤料层36英寸(900mm)或以下尺寸的加肋筋密闭钢管规范 |
A1020/A1020M-02 | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications | 锅炉,过热器,热交换器和冷凝器用熔焊碳和碳锰钢管规范 |
A1021/A1021M-05 | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service | 高温下使用的马氏体不锈钢锻件和锻料规范 |
A1022-01 | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement | 用于混凝土加固的变形和未变形的不锈钢钢筋和焊接钢筋规范 |
A1023/A1023M-02 | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes | 通用绞结起来的碳钢丝索规范 |
A1024/A1024M-02 | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless | 无缝平头黑钢管线标准规范 |
A1025-05 | Standard Specification for Ferroalloys, General Requirements | 通用铁合金规范 |
A1026-03 | Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing | 建筑结构用合金钢结构型材规范 |
A1028-03 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils | 涡轮螺旋桨和压缩机用不锈钢棒材规范 |
A1030/A1030M-05 | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products | 镀层薄板的光滑性的测定惯例 |
A1031-05 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled | 热轧厚重锡卷板拉拔和结构合金钢板材和带材规范 |
A1032-04 | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe | 混凝土预制管用加强钢筋的氢脆试验方法 |
A1033-04 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations | 亚共析度碳和低合金钢状态转换的定量测量和报告惯例 |
A1034/A1034M-05b | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars | 测定钢筋机械连接性能的试验方法 |
A1035/A1035M-06 | Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement | 用于混凝土加固的变形和未变形的低碳含铬棒材规范 |
A1036-04 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers | 用单板测量器测量平轧电工钢的电力频率磁性指南 |
A1037/A1037M-05 | Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded | 熔焊的黑铁管线规范 |
A1038-05 | Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 采用超声波接触阻抗法的便携式硬度测试仪进行测试的标准惯例 |
A1039/A1039M-04 | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process | 双轧铸造商业级结构碳素钢热压薄板材规范 |
A1040-06 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels | 确定低合金和合金锻造碳钢标准分级成分的指南 |
A1041/A1041M-04 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten | 高强度铬钼钨合金钢压力容器板材规范 |
A1042/A1042M-04 | Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains | 下水道和排水管用复合波纹钢管规范 |
A1043/A1043M-05 | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings | 建筑用低低屈服点结构钢规范 |
A1044/A1044M-05 | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete | 混凝土用抗剪钢筋壁骨装配规范 |
A1045-05 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System | 卫生间,公共卫生排水系统连接用柔性聚氯乙烯垫圈规范 |
A1046/A1046M-06 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process | 热浸处理的锌铝锰合金钢薄板材规范 |
A1047/A1047M-05 | Standard Test Method for Pneumatic Leak Testing of Tubing | 管炉空气密封试验方法 |
| | |
发布评论