其实并没有所谓“有线中继”的概念，应该说“给⼀个有线⽹络连接添加⽆线接⼊功能”，也就是所谓的wireless access point (AP).
李志八卦⼀个⽆线路由器=路由器+⽆线AP
以前当⽆线路由器刚出来的时候，价格昂贵，相⽐较⽽⾔，⽆线AP更有性价⽐，但是现在⽆线路由器⼚商众多，价格竞争激烈，甚⾄已经⽐⽆线AP还便宜，所以⽤⽆线路由器就可以了。
以下步骤随⼿⽤英⽂记录，懒得翻译了。
冬至是几月几日注意：这种⽅式有点hacking, 出了问题后果⾃负。
自动挡怎么开⽬前存在的问题是：极路由的云插件没法⽤了，页⾯互联⽹状态显⽰稍有瑕疵(Step 11)，固件不能⾃动在线更新，不过我觉得都⽆伤⼤雅。
The basic idea is to turn Gee into a wireless switcher/AP.
0. Do NOT connect Gee router to any upstream router. (This is just for clarity.)
支付宝可以转账1. Connect to the default Gee router wifi access point. e.g. HiWiFi_XXXXX
2. Go to management page of Gee router. (If you didn't follow step 0, you may need to manually configure your network adapter to be in the same segment as Gee. Default Gee segment is 192.)
3. Keep the DHCP function enabled in Gee. (This is why you can connect your computer wirelessly to the Gee router in step 1. Otherwise, you have to use a wired connection to configure the Gee router as AP.)
4. Modify the Gee's admin page IP into the same segment as upstream router. e.g. 192.168.31.2. So that later you can manage Gee within the upstream router's segment. (Make sure this IP is not in the upstream router's DHCP range. This is to avoid potential IP confilict.)
5. Gee will ask you to reboot. Reboot it.
6. Visit the management page at the new IP set in step 3. e.g. 192.168.31.2.
(btw, you will find the DHCP segment in Gee has automatically changed from 192.168.199.* to 192.168.31.* accordingly.)
7. Rename 2.4G and 5G wifi APs if you want and add passwords to secure them. Then the default HiWiFi_XXXXX access point will disappear. And if you type ipconfig command line, you will find no ip configuration now.
8. Connect to the new APs in step 7.
9. Connect Gee's LAN (NOT WAN) port to upstream router LAN port with a wire.
10. Disable Gee's DHCP function since we want upstream router to provide the DHCP function. (Because there should be only one DHCP server in a single segment.)
11. Now you can use Gee as a wireless switcher/AP.
(btw, if you go to Gee's management page at 192.168.31.2 and check the "Internet" tab, it still says "no connection to Internet". I think this page is related to Gee's WAN port, which connects to nothing now. But anyway. Just leave it as automatic mode and change nothing since WAN port is never used in our scenario.)
陈燃个人资料
Some suggestions:
黄绮珊 大爱1. Set the AP Gee's wireless channel to be different from the upstream router's channel.
2. Set the AP Gee's SSID to be different from the upstream router's. I believe explicit is better than implicit.
3. Encrypt the AP Gee's AP, as step 7 above says.
On my box, 192.168.31.1 is the Mi Mini router management page, 192.168.31.2 is the Gee router management page. Quite handy for me. And both Mi and Gee are in the same segment, which is desired
发布评论