1 目的 Purpose
Define cosmetic criteria of Nokia mobile phone product, Define defect determining baseline of Nokia mobile phone product cosmetic inspection, let producer, inspector can understand product inspection criteria correctly and quickly. To ensure product quality, satisfy customer’s requirement.
2 适用范围：Application
适用于手机产品的外观检验.
Apply to cosmetic inspection for Nokia.
3 参考文件：Reference
AL-18-G-0007 MOSS 800/1 - Visual Quality of Mechanics 机构件外观品质标准
AL-18-G-0006 MOSS 800/2 - Quality Standard of Painted Parts 喷漆件品质标准
AL-18-G-0008 MOSS 800/4 - Quality Standard for Aluminium and Magnesium Die Casting
铝镁压铸产品品质标准
AL-18-G-0010 MOSS 800/7 - Quality Standard for Injection Molded Plastic Parts
注塑塑胶产品品质标准
<<SY B/C-Cover Painting 3D Drawing>> SY B/C-Cover 3D喷漆图面
4 定义 Definition
4.1 缺陷定义: Defect Definition:
4.1.1 严重缺陷：凡制品有危及使用者或生产者生命安全之缺陷，谓之严重缺陷。
Serious defect:: Product defect jeopardize user or producer’s life & security.
4.1.2 主要缺陷：此缺陷会降低其功能或实用性质达不到所预期之目标，谓之主要缺陷。
Major defect: Defect reduces product function or used effect, can not meet expected objective.
4.1.3 次要缺陷：不影响产品使用目的及功能，而仅为瑕疵者，此缺点谓之次要缺陷，亦称轻微缺陷。
Minor Defect: Defect doesn’t influence product function or used effect, just a blemish.
4.2 级面规定: Class definition:
4.2.1 I 级面： 组装后的外露面，例如：视窗、外壳表面
Class I : Surfaces which are visible in the fully assembled. E.g. Windows, Outside surfaces of covers.
4.2.2 II级面： 组装后不能直接看到的次要面，但需要好的品质
Class II : Surfaces which are not visible in normal use but require good visual quality
4.2.3III级面：内部表面，此面客户始终不可看见，不需要非常好的品质
Class III : Inner Surfaces which are never visible to customer in final product and do not require good visual quality
表示：银喷漆面， I 级面
Means: Silver Painted Class I
表示：银喷漆面, II 级面
Means: Silver Painted Class II
表示：黑喷漆面， I 级面
Means: Black Painted Class I
表示：黑喷漆面, II 级面
诺基亚2010手机 Means: Black painted Class II.
表示：灰可溢漆区域III级面
Means: Class III areas, Overspray allowed
SY B COVER
SY C-Cover
以上图示灰区域为三级面，允许溢漆。
以上图示灰区域为三级面，允许溢漆。
SY Hinge-lid
4.3 检验条件: Inspection Conditions
4.3.1 检验人员 : 裸眼视力1.0或1.0以上
Inspector: Eyesight for naked eyes is ≥1.0
4.3.2 照明条件: 照明度要求1000±200Lux），且要求避免其他光源干扰
illumination requirement: 1000±200Lux, prevent interfered by other illuminant
光源类型：D65-标准发光体，类似光源也可以用于检验，但必须经过Nokia认可
Light Type : D65 – CIE Standard illumination. Similar light type can be used, but only after agreement by Nokia.
4.3.3 检验角度: 目光垂直于检验产品的检验区域
Inspection angle: vision is perpendicular to inspection area of product
4.3.4 检验距离和目视时间：Inspection distance and visual time
表面 Surface | 观察距离 Inspection distance | 观察间隔 Inspection interval |
I，II，III | 30 cm ±5cm | 每个面观察10±5秒钟 Each surface inspect 10±5s |
4.3.5 无法判定检验区域是否为外观区域时，用实配件进行评估
If can not determine whether it is cosmetic area, evaluate by matching.
发布评论