Netcfg.hlp file cannot be found - prompt for broadband dial-up
Categories: the operating system appears this problem is likely to streamline the system, the help files deleted, and if your network connection is no problem, this prompt will naturally disappear, no big problem.
This solution is relatively simple, there are three ways:
First, if you have a XP installation disk, then to find the I386 directory and copy the netcfg.hlp file to your computer C drive under the Windows\help directory, and then restart the computer.
Two, you can go to other computer Windows\help directory, the netcfg.hlp copy of this file to your Windows\help directory, and then restart it.
Three, if you can also access it (this morning I found this phenomenon), netcfg.hlp the file download here:
ykcv/tool/down/help/netcfg.hlp, and then put it into this directory and restart Windows\help.
Another download address: www.91files/?
1BXTS0DC81KCM4MD24AI
If the restart problem persists, continue to follow these steps:
Delete your dial-up shortcuts and then rebuild them as per the wizard in xp.
No more, reinstall your driver.
Then register the following items at the start of the run:
Start - run input:
Regsvr32 Shdocvw.dll
Regsvr32 Shell32.dll
Regsvr32 Oleaut32.dll
Regsvr32 Actxprxy.dll
Regsvr32 Mshtml.dll
Regsvr32 Urlmon.dll
Regsvr32 Msjava.dll
Regsvr32 Browseui.dll
Netcfg.hlp is a help file for network connections
When you connect to broadband, if you make a mistake, that is, when you cannot connect to the network, the system will provide you with some error messages as follows: netcfg.hlp:
600 an operation is pending.
601 detected an invalid port handle.
602 specifies that the port is open.
The 603 call buffer is too small.
604 specified the wrong information.
605 cannot set port information.
606 cannot connect to the specified port. 607 detected an invalid event.
608 specifies a device that does not exist. 609 device type does not exist.
610 buffer is invalid.
611 routing is unavailable.
612 routing is not allocated.
613 specified invalid compression.
614 buffer is not enough.
615 no port found.
616 an asynchronous request is pending.
617 port or device has been disconnected.
618 port not opened.
619 cannot establish a connection to the remote computer, so the port used for this connection is closed.
620 no endpoints.
621 cannot open phone book file.
622 cannot load phone book file.
623 cannot find phone book entry.
624 cannot write phone book file.
625 invalid information found in the phone book.
626 cannot load string.
627 cannot find key.
628 the connection is terminated by the remote computer before the connection is complete.
The 629 data link is terminated by the remote computer.
630 port disconnected due to hardware failure.
631 the user has disconnected the port connection.
632, the structure size is not correct.
Port 633 is already in use, or no configuration ports have been configured for remote access.
634 cannot register a computer on a remote network.
635 unknown error.
636 the wrong device is connected to the port.
637 string cannot be converted.
638 request timeout.建立宽带连接
639 there is no asynchronous network available.
640 NetBIOS error occurred.
641, the server cannot allocate the NetBIOS resources needed to support the client.
642 has registered a NetBIOS name on the remote network.
643, the network adapter on the server is out of order.
发布评论