proe5.0安装方法    发此贴也许有人说我是老顽固，既然用上了win7，还舍不得proe2001，野火也罢，2001也罢，即便马上有的开始用CREO，其实做结构，这些只不过是一些工具而已。由于新买的电脑8G内存，xp等32位系统无法识别大于3.2G以上内存，无赖装上了win764位，感觉不错，速度，外观是上了一个台阶。但是我的吃饭工具proe2001无法运行。由于2001的年代太久远现在的64位CPU系统那是都还没有出现。下面是WIN7 64位系统下运行PROE2001的方法：希望对那些老人们有用。
BIN文件夹下的PROE2001.BAT，在WIN7 64位系统下会一闪而过，当使用中断命令观察窗口时，会发现CMD窗口的提示是无法识别处理器的架构，用记事本打开PROE2001.BAT，会发现以下字段
if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR%" == "MIPS_R4000" set MC=r4000_nt
if "%PROCESSOR%" == "Alpha_AXP" set MC=alpha_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "MIPS" set MC=r4000_nt
if "%PROCESSOR_ARCHITECTURE%" == "ALPHA" set MC=alpha_nt
if not "%winbootdir%" == "" set mc=i486_win95
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=Alpha_AXP    - For Windows NT Alpha based machines.
echo.
echo set PROCESSOR=MIPS_R4000    - For Windows NT MIPS based machines.
echo.
echo set PROCESSOR=INTEL_486    - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_64      - For Windows Intel Itanium based machines.
echo.
echo set winbootdir=<boot dir>  - For Windows 95/98 machines.
echo.
exit
:mc_done
其实绝大多数都是已经被淘汰的，需要进行编辑处理，将上述字段修改为如下：
if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt
if "%PROCESSOR_ARCHITECTURE%" == "AMD64" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=INTEL_486    - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_64      - For Windows Intel Itanium based machines.
echo.
echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines.
echo.
exit
:mc_done
就可以满足现在的电脑了。
修改完保存退出，再双击，使用了很多年的，拥有自己一整套开发快捷键，特殊按钮的，老的掉牙确相当亲切的PROE2001又回来了，赶紧加载自己的启动目录吧。哎，这点东西搞了我一个下午加晚上····
屏幕闪烁的话进入proe界面/选项/查graphics/把值改为win32_gdi/然后确定/最后从启proe。
win32-gdi
另存为config.pro
保存位置d:\11\config.pro目标一至,可自由选.这样后 在win7可以不闪屏